PI6ATV, (D)ATV repeater, Gerbrandytoren, IJsselstein, Utrecht (NL) - Amateur Radio Repeaters on Waymarking.com

The repeater has been housed for almost 20 years in the so-called “reporting booth” which is located about halfway up the tube mast at a height of 220m, the transmitting antennas and various receiving antennas are still located here.
This gives PI6ATV a range of approximately 100 kilometers (or more) around IJsselstein.
In 2015, PI6ATV came under the management of the Scoop Hobbyfonds Foundation (better known as hobbyscoop).
At the beginning of 2016, the physical equipment was moved to the 20th floor of the Gerbrandy Tower, where a new PI6ATV was created.

The following output frequenties are used:

Type	Frequency	Mode	Power	Polarisation	Direction
analog	10.475 GHz	FM	11 watt	horizontal	north-east
digital	10.290 GHz	DVB-S2 8PSK Symbolrate: 22500 FEC: 3/4	7.5 watt	horizontal	south-west

The analog input freqeuncies are as follows:

Frequency	Audio FM	Audio Nicam	Polarisation	Direction
1252 MHz	7.02 + 7.20	6.552	horizontal
2330 MHz	7.02 + 7.20	6.552	horizontal
5785 MHz	7.02 + 7.20	6.552	horizontal
10.170 GHz	7.02 + 7.20	6.552	horizontal	South
10.200 GHz	7.02 + 7.20	6.552	horizontal	North
24.200 GHz	7.02 + 7.20	6.552	horizontal

The digital input freqeuncies are as follows:

Frequency	Mode	Symborate	Polarisation	Direction
435 MHz	DVB-S/DVB-S2	1.000	horizontal
1265 MHz	DVB-S/DVB-S2	2.000	horizontal
2375 MHz	DVB-S/DVB-S2	2.000	horizontal
5785 MHz	DVB-S	2.000	horizontal
10.165 GHz	DVB-S	2.000	horizontal	South
10.195 GHz	DVB-S	2.000	horizontal	North
24.265 GHz	DVB-S	2.000	horizontal

Repeater Call Sign: PI6ATV Output Frequency: 10,290.00 Input Frequency: 10,195.00 Input/Output Tone: No tone is required for input, and no tone is encoded on output. Output Power: 10.00 Antenna height (above average terrain): 220.00 Club Web Page: [Web Link] IRLP: no Echolink: no D-STAR: no Input Tone: Not listed Output Tone: Not listed IRLP Node ID: Not listed Echolink Node Number: Not listed

Visit Instructions:
Not ham operator: Obtain geographical proximity to repeater site and post relevant picture with log. CAUTION: Observe posted KEEP OUT signs to prevent exposure to high levels of RF emissions. Do not climb towers. Do not trespass. Ham operator: Complete a QSO on the repeater. Requirements: Your call, the other station's call, signal report from other station, your location relative to repeater (GPS coordinates, or bearing/distance), transmit power.

Recent Visits/Logs:

Date Logged Log   08/30/2022 PetjeOp visited it 04/25/2022 MaaBo visited it 03/24/2022 T-Team! visited it 02/08/2022 Andre 61 visited it 09/08/2021 Becktracker visited it

View all visits/logs