M48 Patton - NCNG - Fayetteville, NC, USA
Posted by: 
NCDaywalker
N 35° 00.747 W 078° 53.257
17S E 692744 N 3876462
"The M48 Patton is a main battle tank (MBT) that was designed in the United States. It was the third tank to be officially named after General George S. Patton, commander of the U.S. Third Army.
Waymark Code: WMVRF4
Location: North Carolina, United States
Date Posted: 05/23/2017
Views: 0
From Wikipedia article: (
visit link)
"General Patton was one of the earliest American advocates for the use of tanks in battle. It was a further development of the M47 Patton tank. The M48 Patton was in U.S. service until replaced by the M60[6] and served as the U.S. Army and Marine Corps's primary battle tank in South Vietnam during the Vietnam War. It was widely used by U.S. Cold War allies, especially other NATO countries.
The M48 Patton tank was designed to replace the previous M47 Pattons and M4 Shermans. Although largely resembling the M47, the M48 was a completely new design. It was the last U.S. tank to mount the 90 mm tank gun, with the last model, the M48A5, being upgraded to carry the new standard weapon of the M60, the 105mm gun. Some M48A5 models served well into the 1980s with American forces, and many M48s remain in service in other countries. The Turkish Army has the largest number of modernized M48 MBTs, with more than 1,400 in its inventory. Of these, around 1,000 have been phased out, placed in storage, or modified as ARVs.
On 27 February 1951, OTCM (Ordnance Technical Committee Minutes) #33791 initiated the design of the new tank, designated the 90mm Gun Tank T-48 (the prefix letter "T" would be replaced by the prefix "X" beginning with the M60 series tank). A deeper modernization than the M46 and the M47, the M48 featured a new hemispherical turret, a redesigned hull, and an improved suspension. The hull machine gunner position was removed, reducing the crew to four. On 2 April 1953, OTCM order #34765 standardized the last of the Patton series tanks as the 90mm Gun Tank M48 Patton.
Nearly 12,000 M48s were built from 1952 to 1959. The early designs, up to the M48A2C's, were powered by a gasoline 12-cylinder engine and a 1-cylinder auxiliary generator (called the "Little Joe"). The gasoline engine versions gave the tank a shorter operating range and were more prone to catching fire when hit. Although considered less reliable than diesel-powered versions, numerous examples saw combat use in various Arab-Israeli conflicts. The low flashpoint of MIL-PRF-6083 hydraulic fluid used in the recoil mechanisms and hydraulic systems for rotating weapons or aiming devices is less than 212 °F (100 °C) and could result in a fireball in the crew compartment when the lines were ruptured. MIL-PRF-6083 fluid was not peculiar to the M-48 and is no longer used in combat armored vehicles, having been replaced by fire resistant hydraulic fluid. Beginning in 1959, most American M48s were upgraded to the M48A3 model, which featured a more-reliable and longer-range diesel power plant. M48s with gasoline engines, however, were still in use in the US Army through 1968, and through 1975 by many West German Army units, including the 124th Panzer Battalion."
Visit Instructions:
1.) Only log the places you physically visit.
2.) Please submit a photo(s) taken by you of your visit to the location (non-copyrighted photos only). GPS photos are also accepted with the location in the background, and old vacation photos are accepted. If you are not able to provide a photo, then please describe your visit or give a story about the visit
3.) Please provide any additional information about the equipment you may have that is not listed in the waymark's description.