Tom Miller Dam & Lake Austin – Austin, TX
Posted by: Groundspeak Premium Member Tygress
N 30° 17.643 W 097° 47.180
14R E 616713 N 3351992
Completed in early 1940, Tom Miller Dam, which forms Lake Austin, is the 3rd completed & furthest downstream of LCRA’s 6 Highland Lakes Chain dams, a Historic Civil Engineering Landmark of Texas.
Waymark Code: WMJ0FV
Location: Texas, United States
Date Posted: 09/05/2013
Published By:Groundspeak Regular Member lenron
Views: 9

You might reasonably claim Lake Austin started the whole Highland Lakes campaign.

In the 1890s, then Lake McDonald (for John McDonald, the mayor who had whipped up support for the project) was the first large reservoir in Texas, formed by the construction of Austin Dam. That initial ‘masonry’ (granite block) dam was begun in 1890 and completed in 1893. Standing sixty feet high and stretching nearly 1200 feet across the river, at the time it was one of the largest dams in the world. A. P. Wooldridge and other boosters of the project had originally envisioned harnessing the river to drive mill machinery directly, but their engineers steered them toward that newfangled “electricity”; and the powerhouse erected on the east bank of the river was filled with electrical dynamos that supplied current to Austin’s new network of electric streetcars, as well as to the “moonlight towers” the city acquired in 1895. The shores of Lake McDonald attracted new residents and developers, while the waters of the lake drew those seeking respite from the legendary Texas heat.

But the promised economic boom never materialized. Worse, the Austin Dam was plagued by problems from the get go. The structure was built on a fault line that allowed water to seep. Silt had filled nearly half the lake by February 1900, the pressure of which was already causing the dam to slide. And the dam's design failed to accommodate the force that could be created by a large volume of water. The fatal one-two punch came via a five-inch rainfall across the Austin area on April 6, 1900 compounded by heavy rains in the Hill Country. With no upstream dams to capture runoff, the Austin Dam was defenseless against the resulting flood wave, which one eyewitness estimated at 25 feet high and a mile wide.

“Enormous storms upriver sent a torrent of water cascading eleven feet over the crest of the dam. After the rains had stopped, Austinites came out that bright Saturday morning to see their local version of Niagara. Then at 11:20 am they heard a loud crack—“like a gunshot,” several said—and watched in horror as a central section of the dam gave way and slid sixty feet downstream. Water blasted into the powerhouse, wrecking it and killing eight people. Lake McDonald vanished, and though the western end of the dam still stood, the eastern half was destroyed. More than a century later, great chunks of it are still to be found scattered in the riverbed, forming part of the present Red Bud Isles.” -- Bruce J. Hunt “The Rise and Fall of the Austin Dam” (visit link)

In all, the flood drowned 18 people and destroyed 100 houses in Austin, at a total estimated loss of $1.4 million in 1900 dollars. (http://www.lcra.org/newsstory/2010/austindam110thanniversary.html)

However, having gotten a taste of city-owned electric power, the people of Austin refused to go back; the city bought out the local private power company, which used steam-driven generators, and today’s Austin Energy municipal utility is in a sense a legacy of the old Austin Dam.

Reconstruction of Austin Dam started in 1912 by the City of Austin. The new dam was hollow, with 57 wooden gates to control floods. But construction was abandoned in 1915 due to a dispute between the contractor and the city of Austin. High waters destroyed the near-complete dam later that year – when the floodgates, which were only 15 feet wide, became clogged by driftwood. The driftwood jammed the gates, and the floodwaters tore out the center section of the dam. Rather the last straw for the financially strapped City of Austin. The wrecked dam then sat derelict for 20 years, “a tombstone on the river.”

In 1935, 1936 and 1937, floods struck the crippled dam again and again. Probably the most iconic picture was taken in June ‘35 when a boathouse got stuck on the spillway section. Two years later, Austin Mayor Tom Miller reached an agreement with LCRA to rebuild the dam a ‘third’ time. Tom Miller Dam, a concrete pier and slab structure 1,590 feet long, was completed in early 1940, at the same time LCRA was building Mansfield Dam, the giant upstream that would eventually protect Austin from the worst of the Colorado River's floods.

The new dam actually incorporated the remaining portions of the 1893 and 1912 dams – encasing them in layers of concrete. By the time it was finished, unsurprisingly, this project that just may have sparked it all was already overshadowed by the much larger LCRA dams upstream -- particularly the nearly complete Mansfield Dam (Lake Travis) and still arguably the largest multiple arch dam in the nation, Buchanan Dam.

Austin and LCRA held dedication ceremonies for the new Austin dam on April 6, 1940 – one day before the 40th anniversary of the destruction of the original dam. Chamber of Commerce officials recommended naming the dam in honor of Miller, and the name stuck. Why Tom Miller? Mayor Robert Thomas Miller’s enthusiastic support of President Roosevelt's program and personal relationships with New Deal officials enabled him to bring Federal Emergency Relief Administration projects to Austin, thereby securing employment for many Austin citizens and bringing some of the Rooseveltian experiments to town. (http://www.tshaonline.org/handbook/online/articles/fmi21)

This was the third in the integrated Colorado River’s Historic Civil Engineering Landmark of Texas Highland Lakes Chain, following Buchanan and Inks, and just beating out Mansfield.

From 1995 through 2005 LCRA made several upgrades to Tom Miller and the other Highland Lakes dams to ensure that all would continue to withstand a "probable maximum flood,” an engineering term for a worst-case flood scenario. Upgrades at Tom Miller Dam included anchoring the structure to the lakebed with steel cables and additional concrete, adding other structural reinforcement, and equipping each of the nine floodgates with its own hoist to expedite opening and closing. (http://www.lcra.org/newsstory/2010/austindam110thanniversary.html)

Coordinates are for the dam itself. As it sits in an urban setting, there are many ways to get good up and downstream views. The best are from Red Bud Trail, which has parking and hiking to downstream views. Forest View Drive on the West and Lake Austin Blvd to the East also afford dam and lake viewing. Above the dam, slake your hunger/thirst and get some great views from the Hula Hut (or just its parking lot) N30 17.680 W 097 47.048). If you can, boat there. Just remember to post where the photo was taken and write a descriptive log!

The Google Earth satellite view is also worth a look.

Just some FAQs (courtesy LCRA (visit link)
FYI: TOM MILLER DAM
Location: Travis County, 298 river miles from the Gulf of Mexico
When built: 1938 to 1940
Dam dimensions: 100.5 feet high, 1,590 feet long
Primary purposes: Hydroelectric power, water supply
Generating capacity: 17 megawatts
Top of dam: 519 feet above msl
Spillway elevation: 492.8 feet above msl
Floodgates: nine
Total discharge capacity: 107,700 cubic feet per second (cfs):
•4 large floodgates @ 15,300 cfs each
•5 small floodgates @ 8,600 cfs each
•2 turbines @ 1,750 cfs each
Original name: Tom Miller Dam
DETAILS ON LAKE AUSTIN
Lake area: 1,830 acres
Elevation when full: 492.8 feet above mean sea level (msl)
Volume when full: 24,644 acre-feet
Historic high: 495.2 feet above msl on May 25, 1981
Historic low: 474.3 feet above msl on Feb. 17, 1963
Target operating range: 491.8 to 492.8 feet above msl
100-year flood level at dam: 493 feet above msl
Dimensions: 20.25 miles long, 1,300 feet at widest point
Original name: Lake McDonald

LCRA Corporate Photo Archives – Tom Miller Dam (visit link)
April marks 110th anniversary of destruction of original Austin Dam
by John Williams (LCRA Apr 5, 2010) (visit link)
Tom Miller Dam and Lake Austin Dam built atop of two earlier structures destroyed by floods (visit link)
TPWD Webcast “History of Tom Miller Dam” (visit link)
A particularly good history of the Tom Miller Dam’s predecessors: The Rise and Fall of the Austin Dam; Bruce J. Hunt (visit link)
UT Texas Library (visit link)
Lake Austin (TSHA Handbook of Texas Online) (visit link)
“The history of LCRA Early years and first critical test” (the timeline is particularly interesting)
(visit link)
LCRA's Historic Moment: History of the Highland Lakes (visit link)
LCRA dams form the Highland Lakes
Structures designed for flood management, water supply, hydroelectricity (visit link)
Texas State Historical Association The Handbook of Texas Online:
Lower Colorado River Authority (visit link)
Waterway where the dam is located: Colorado River (Texas)

Main use of the Water Dam: Hydroelectric Power Production

Material used in the structure: Concrete

Height of Dam: 100.5 feet

Date built: 04/06/1940

Fishing Allowed: yes

Motor Sports Allowed: yes

Visit Instructions:
Photo of the Dam and a description of your visit.
Search for...
Geocaching.com Google Map
Google Maps
MapQuest
Bing Maps
Nearest Waymarks
Nearest Water Dams
Nearest Geocaches
Create a scavenger hunt using this waymark as the center point
Recent Visits/Logs:
Date Logged Log User Rating  
Raven visited Tom Miller Dam & Lake Austin – Austin, TX 11/08/2014 Raven visited it
WalksfarTX visited Tom Miller Dam & Lake Austin – Austin, TX 11/16/2013 WalksfarTX visited it
Benchmark Blasterz visited Tom Miller Dam & Lake Austin – Austin, TX 06/28/2007 Benchmark Blasterz visited it

View all visits/logs